dmesg - Sapphire AMD Radeon RX 470
Linux version 4.10.1-1-ARCH (builduser@heftig-13232) (gcc version 6.3.1 20170109 (GCC) ) #1 SMP PREEMPT Sun Feb 26 21:08:53 UTC 2017
Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda2 rw iommu=1 iommu=pt amd_iommu=fullflush amdgpu.powerplay=1 libahci.ignore_sss=1 quiet resume=/dev/mapper/excelsior-swap
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000bdd9bfff] usable
BIOS-e820: [mem 0x00000000bdd9c000-0x00000000bddcbfff] reserved
BIOS-e820: [mem 0x00000000bddcc000-0x00000000bdddbfff] ACPI data
BIOS-e820: [mem 0x00000000bdddc000-0x00000000be1cafff] ACPI NVS
BIOS-e820: [mem 0x00000000be1cb000-0x00000000bed85fff] reserved
BIOS-e820: [mem 0x00000000bed86000-0x00000000bedc3fff] type 20
BIOS-e820: [mem 0x00000000bedc4000-0x00000000bedc4fff] usable
BIOS-e820: [mem 0x00000000bedc5000-0x00000000befcafff] ACPI NVS
BIOS-e820: [mem 0x00000000befcb000-0x00000000bf44afff] usable
BIOS-e820: [mem 0x00000000bf44b000-0x00000000bf7dbfff] reserved
BIOS-e820: [mem 0x00000000bf7dc000-0x00000000bf7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000063effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI=0xbddd4000 ACPI 2.0=0xbddd4000 SMBIOS=0xf04c0 MPS=0xfd4d0
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./970A-UD3, BIOS FDe 10/07/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x63f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CEFFF write-protect
CF000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000BF800000 mask FFFFFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000063f000000 aka 25584M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd870-0x000fd87f] mapped at [ffff8800000fd870]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x01d60000, 0x01d60fff] PGTABLE
BRK [0x01d61000, 0x01d61fff] PGTABLE
BRK [0x01d62000, 0x01d62fff] PGTABLE
BRK [0x01d63000, 0x01d63fff] PGTABLE
BRK [0x01d64000, 0x01d64fff] PGTABLE
BRK [0x01d65000, 0x01d65fff] PGTABLE
RAMDISK: [mem 0x36ad7000-0x37562fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000BDDD4000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BDDD4078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000BDDD99E8 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20160930/tbfadt-658)
ACPI: DSDT 0x00000000BDDD4170 005872 (v02 ALASKA A M I 00000088 INTL 20051117)
ACPI: FACS 0x00000000BE1C5F80 000040
ACPI: APIC 0x00000000BDDD9AE0 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000BDDD9B80 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000BDDD9BC8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000BDDD9C08 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: BGRT 0x00000000BDDD9C40 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000BDDD9C78 001714 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: MATS 0x00000000BDDDB390 000034 (v02 ALASKA A M I 00000002 w?x2 00000000)
ACPI: IVRS 0x00000000BDDDB3C8 0000C8 (v01 AMD RD890S 00202031 AMD 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000063effffff]
NODE_DATA(0) allocated [mem 0x63eff5000-0x63eff9fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000063effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x00000000bdd9bfff]
node 0: [mem 0x00000000bedc4000-0x00000000bedc4fff]
node 0: [mem 0x00000000befcb000-0x00000000bf44afff]
node 0: [mem 0x00000000bf7dc000-0x00000000bf7fffff]
node 0: [mem 0x0000000100001000-0x000000063effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000063effffff]
On node 0 totalpages: 6279647
DMA zone: 64 pages used for memmap
DMA zone: 25 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 12106 pages used for memmap
DMA32 zone: 774721 pages, LIFO batch:31
Normal zone: 85952 pages used for memmap
Normal zone: 5500927 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbdd9c000-0xbddcbfff]
PM: Registered nosave memory: [mem 0xbddcc000-0xbdddbfff]
PM: Registered nosave memory: [mem 0xbdddc000-0xbe1cafff]
PM: Registered nosave memory: [mem 0xbe1cb000-0xbed85fff]
PM: Registered nosave memory: [mem 0xbed86000-0xbedc3fff]
PM: Registered nosave memory: [mem 0xbedc5000-0xbefcafff]
PM: Registered nosave memory: [mem 0xbf44b000-0xbf7dbfff]
PM: Registered nosave memory: [mem 0xbf800000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
e820: [mem 0xbf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 35 pages/cpu @ffff88063ec00000 s103640 r8192 d31528 u262144
pcpu-alloc: s103640 r8192 d31528 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 6181500
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda2 rw iommu=1 iommu=pt amd_iommu=fullflush amdgpu.powerplay=1 libahci.ignore_sss=1 quiet resume=/dev/mapper/excelsior-swap
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
Memory: 24444416K/25118588K available (6346K kernel code, 1090K rwdata, 1980K rodata, 1296K init, 1032K bss, 674172K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:8448 nr_irqs:1032 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 4018.253 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8039.36 BogoMIPS (lpj=13394176)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160930
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Freeing SMP alternatives memory: 24K
ftrace: allocating 25109 entries in 99 pages
smpboot: Max logical packages: 1
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (64318.72 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xbdddc000-0xbe1cafff] (4124672 bytes)
PM: Registering ACPI NVS region [mem 0xbedc5000-0xbefcafff] (2121728 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 7:44:17, date: 03/10/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [1002:67df] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x24: [mem 0xfea00000-0xfea3ffff]
pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:00.1: [1002:aaf0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:02:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xfe900000-0xfe907fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xd0304000-0xd0304fff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xd0300000-0xd0303fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:09.0: PCI bridge to [bus 03]
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref]
pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xfe800000-0xfe807fff 64bit]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PCI bridge to [bus 04]
pci 0000:00:0a.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:05:0e.0: [1106:3044] type 00 class 0x0c0010
pci 0000:05:0e.0: reg 0x10: [mem 0xfe700000-0xfe7007ff]
pci 0000:05:0e.0: reg 0x14: [io 0xc000-0xc07f]
pci 0000:05:0e.0: supports D2
pci 0000:05:0e.0: PME# supported from D2 D3hot D3cold
pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:14.4: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 10 11 14 15) *0
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0xbdd9c000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbedc5000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf44b000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
e820: reserve RAM buffer [mem 0x63f000000-0x63fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c51] has been reserved
system 00:01: [io 0x0c52] has been reserved
system 00:01: [io 0x0c6c] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cd5] has been reserved
system 00:01: [io 0x0cd6-0x0cd7] has been reserved
system 00:01: [io 0x0cd8-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x089f] has been reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [io 0x0900-0x090f] has been reserved
system 00:01: [io 0x0910-0x091f] has been reserved
system 00:01: [io 0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0220-0x0227] has been reserved
system 00:02: [io 0x0228-0x0237] has been reserved
system 00:02: [io 0x0a20-0x0a2f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfeb20000-0xfeb23fff] could not be reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:09.0: PCI bridge to [bus 03]
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref]
pci 0000:00:0a.0: PCI bridge to [bus 04]
pci 0000:00:0a.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:14.4: PCI bridge to [bus 05]
pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:14.4: bridge window [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 2 [mem 0xd0300000-0xd03fffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:05: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:05: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:05: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:05: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:05: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:05: resource 10 [mem 0xc0000000-0xffffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 10800K
iommu: Adding device 0000:00:00.0 to group 0
iommu: Using direct mapping for device 0000:00:00.0
iommu: Adding device 0000:00:02.0 to group 1
iommu: Using direct mapping for device 0000:00:02.0
iommu: Adding device 0000:00:04.0 to group 2
iommu: Using direct mapping for device 0000:00:04.0
iommu: Adding device 0000:00:09.0 to group 3
iommu: Using direct mapping for device 0000:00:09.0
iommu: Adding device 0000:00:0a.0 to group 4
iommu: Using direct mapping for device 0000:00:0a.0
iommu: Adding device 0000:00:11.0 to group 5
iommu: Using direct mapping for device 0000:00:11.0
iommu: Adding device 0000:00:12.0 to group 6
iommu: Using direct mapping for device 0000:00:12.0
iommu: Adding device 0000:00:12.2 to group 6
iommu: Adding device 0000:00:13.0 to group 7
iommu: Using direct mapping for device 0000:00:13.0
iommu: Adding device 0000:00:13.2 to group 7
iommu: Adding device 0000:00:14.0 to group 8
iommu: Using direct mapping for device 0000:00:14.0
iommu: Adding device 0000:00:14.2 to group 9
iommu: Using direct mapping for device 0000:00:14.2
iommu: Adding device 0000:00:14.3 to group 10
iommu: Using direct mapping for device 0000:00:14.3
iommu: Adding device 0000:00:14.4 to group 11
iommu: Using direct mapping for device 0000:00:14.4
iommu: Adding device 0000:00:14.5 to group 12
iommu: Using direct mapping for device 0000:00:14.5
iommu: Adding device 0000:00:16.0 to group 13
iommu: Using direct mapping for device 0000:00:16.0
iommu: Adding device 0000:00:16.2 to group 13
iommu: Adding device 0000:01:00.0 to group 14
iommu: Using direct mapping for device 0000:01:00.0
iommu: Adding device 0000:01:00.1 to group 14
iommu: Adding device 0000:02:00.0 to group 15
iommu: Using direct mapping for device 0000:02:00.0
iommu: Adding device 0000:03:00.0 to group 16
iommu: Using direct mapping for device 0000:03:00.0
iommu: Adding device 0000:04:00.0 to group 17
iommu: Using direct mapping for device 0000:04:00.0
iommu: Adding device 0000:05:0e.0 to group 11
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Interrupt remapping enabled
AMD-Vi: IO/TLB flush on unmap enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xae1a2000-0xb21a2000] (64MB) mapped at [ffff8800ae1a2000-ffff8800b21a1fff]
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=23 bucket_order=0
zbud: loaded
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, using 8128k, total 8128k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
GHES: HEST is not enabled!
Linux agpgart interface v0.103
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
microcode: CPU0: patch_level=0x06000822
microcode: CPU1: patch_level=0x06000822
microcode: CPU2: patch_level=0x06000822
microcode: CPU3: patch_level=0x06000822
microcode: CPU4: patch_level=0x06000822
microcode: CPU5: patch_level=0x06000822
microcode: CPU6: patch_level=0x06000822
microcode: CPU7: patch_level=0x06000822
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Magic number: 9:157:723
rtc_cmos 00:03: setting system clock to 2017-03-10 07:44:18 UTC (1489131858)
PM: Checking hibernation image partition /dev/mapper/excelsior-swap
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1296K
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1832K
Freeing unused kernel memory: 68K
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Running with unpopulated /etc.
systemd[1]: No hostname configured.
systemd[1]: Set hostname to .
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Initializing machine ID from random generator.
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Populated /etc with preset unit settings.
systemd[1]: Reached target Swap.
systemd[1]: Listening on LVM2 metadata daemon socket.
[drm] Initialized
[drm] amdgpu kernel modesetting enabled.
checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
fb: switching to amdgpudrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x174B:0xE347 0xC7).
[drm] register mmio base: 0xFEA00000
[drm] register mmio size: 262144
[drm] doorbell mmio base: 0xD0000000
[drm] doorbell mmio size: 2097152
[drm] probing gen 2 caps for device 1002:5a16 = 31cd02/0
[drm] probing mlw for device 1002:5a16 = 31cd02
[drm] UVD is enabled in VM mode
[drm] VCE enabled in VM mode
amdgpu 0000:01:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
ATOM BIOS: E347
[drm] GPU post is not needed
amdgpu 0000:01:00.0: VRAM: 8192M 0x0000000000000000 - 0x00000001FFFFFFFF (8192M used)
amdgpu 0000:01:00.0: GTT: 8192M 0x0000000200000000 - 0x00000003FFFFFFFF
[drm] Detected VRAM RAM=8192M, BAR=256M
[drm] RAM width 256bits GDDR5
[TTM] Zone kernel: Available graphics memory: 12323658 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 8192M of VRAM memory ready
[drm] amdgpu: 8192M of GTT memory ready.
[drm] GART: num cpu pages 2097152, num gpu pages 2097152
[drm] PCIE GART of 8192M enabled (table at 0x0000000000040000).
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
amdgpu 0000:01:00.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
Can't find requested voltage id in vdd_dep_on_sclk table!
amdgpu: powerplay initialized
[drm] AMDGPU Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD6
[drm] DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x486b
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] DP-2
[drm] HPD4
[drm] DDC: 0x4870 0x4870 0x4871 0x4871 0x4872 0x4872 0x4873 0x4873
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x486c 0x486c 0x486d 0x486d 0x486e 0x486e 0x486f 0x486f
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm] HDMI-A-2
[drm] HPD5
[drm] DDC: 0x4874 0x4874 0x4875 0x4875 0x4876 0x4876 0x4877 0x4877
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY1
[drm] Connector 4:
[drm] DVI-D-1
[drm] HPD3
[drm] DDC: 0x487c 0x487c 0x487d 0x487d 0x487e 0x487e 0x487f 0x487f
[drm] Encoders:
[drm] DFP5: INTERNAL_UNIPHY
amdgpu 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000200000008, cpu addr 0xffff880621931008
amdgpu 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000200000018, cpu addr 0xffff880621931018
amdgpu 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000200000028, cpu addr 0xffff880621931028
amdgpu 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000200000038, cpu addr 0xffff880621931038
amdgpu 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000200000048, cpu addr 0xffff880621931048
amdgpu 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000200000058, cpu addr 0xffff880621931058
amdgpu 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000200000068, cpu addr 0xffff880621931068
amdgpu 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000200000078, cpu addr 0xffff880621931078
amdgpu 0000:01:00.0: fence driver on ring 8 use gpu addr 0x0000000200000088, cpu addr 0xffff880621931088
amdgpu 0000:01:00.0: fence driver on ring 9 use gpu addr 0x0000000200000098, cpu addr 0xffff880621931098
amdgpu 0000:01:00.0: fence driver on ring 10 use gpu addr 0x00000002000000a8, cpu addr 0xffff8806219310a8
[drm] Found UVD firmware Version: 1.79 Family ID: 16
amdgpu 0000:01:00.0: fence driver on ring 11 use gpu addr 0x000000000109c420, cpu addr 0xffffc9000485a420
[drm] Found VCE firmware Version: 52.4 Binary ID: 3
amdgpu 0000:01:00.0: fence driver on ring 12 use gpu addr 0x00000002000000c8, cpu addr 0xffff8806219310c8
amdgpu 0000:01:00.0: fence driver on ring 13 use gpu addr 0x00000002000000d8, cpu addr 0xffff8806219310d8
i8042: PNP: No PS/2 controller found.
[AVFS] Something is broken. See log!
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000
libata version 3.00 loaded.
firewire_ohci 0000:05:0e.0: enabling device (0000 -> 0003)
[drm] ring test on 0 succeeded in 13 usecs
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[drm] ring test on 1 succeeded in 26 usecs
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
[drm] ring test on 2 succeeded in 24 usecs
[drm] ring test on 3 succeeded in 11 usecs
[drm] ring test on 4 succeeded in 10 usecs
[drm] ring test on 5 succeeded in 11 usecs
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[drm] ring test on 6 succeeded in 10 usecs
[drm] ring test on 7 succeeded in 10 usecs
[drm] ring test on 8 succeeded in 9 usecs
xhci_hcd 0000:02:00.0: hcc params 0x040050af hci version 0x100 quirks 0x00080490
[drm] ring test on 9 succeeded in 6 usecs
[drm] ring test on 10 succeeded in 6 usecs
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:13.2: EHCI Host Controller
usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5
ahci 0000:00:11.0: version 3.0
xhci_hcd 0000:04:00.0: hcc params 0x040050af hci version 0x100 quirks 0x00080490
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b380 irq 19
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 7
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 8
ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000
[drm] ring test on 11 succeeded in 1 usecs
[drm] UVD initialized successfully.
firewire_ohci 0000:05:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9
ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000
[drm] ring test on 12 succeeded in 9 usecs
[drm] ring test on 13 succeeded in 4 usecs
[drm] VCE initialized successfully.
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10
ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000
i8042: PNP: No PS/2 controller found.
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11
ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000
[drm] fb mappable at 0xC136F000
[drm] vram apper at 0xC0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 4 ports detected
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
usb 5-2: new high-speed USB device number 2 using xhci_hcd
usb 7-1: new high-speed USB device number 2 using ehci-pci
usb-storage 5-2:1.0: USB Mass Storage device detected
scsi host6: usb-storage 5-2:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: GOODRAM, SAFM22.3, max UDMA/133
ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA GOODRAM 22.3 PQ: 0 ANSI: 5
ata2.00: ATA-8: TOSHIBA HDWD110, MS2OA8J0, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: HL-DT-ST BD-RE BH14NS40, 1.01, max UDMA/100
ata3.00: configured for UDMA/100
usb 9-4: new low-speed USB device number 2 using ohci-pci
usb 8-1: new low-speed USB device number 2 using ohci-pci
firewire_core 0000:05:0e.0: created device fw0: GUID 0049e55082720b00, S400
usb 7-2: new high-speed USB device number 3 using ehci-pci
scsi 1:0:0:0: Direct-Access ATA TOSHIBA HDWD110 A8J0 PQ: 0 ANSI: 5
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb9/9-4/9-4:1.0/0003:1C4F:0002.0001/input/input0
hub 7-2:1.0: USB hub found
hub 7-2:1.0: 4 ports detected
hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:13.0-4/input0
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb9/9-4/9-4:1.1/0003:1C4F:0002.0002/input/input1
failed to send message 5e ret is 0
hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:13.0-4/input1
hid-generic 0003:0D9F:0004.0003: hiddev0,hidraw2: USB HID v1.00 Device [POWERCOM Co.,LTD HID UPS Battery] on usb-0000:00:12.0-1/input0
scsi 2:0:0:0: CD-ROM HL-DT-ST BD-RE BH14NS40 1.01 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
tsc: Refined TSC clocksource calibration: 4018.395 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39ec3d746f7, max_idle_ns: 440795296172 ns
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 7-2.2: new high-speed USB device number 4 using ehci-pci
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
usb 9-5: new low-speed USB device number 3 using ohci-pci
random: fast init done
PM: Starting manual resume from disk
PM: Hibernation image partition 254:1 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
usb 8-2: new full-speed USB device number 3 using ohci-pci
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb9/9-5/9-5:1.0/0003:046D:C077.0004/input/input2
hid-generic 0003:046D:C077.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.0-5/input0
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE 0902 PQ: 0 ANSI: 6
sd 6:0:0:0: [sdc] Attached SCSI removable disk
failed to send pre message 145 ret is 0
Console: switching to colour frame buffer device 240x67
amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
[drm] ib test on ring 11 succeeded
clocksource: Switched to clocksource tsc
[drm:amdgpu_vce_ring_test_ib [amdgpu]] *ERROR* amdgpu: IB test timed out.
[drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* amdgpu: failed testing IB on ring 12 (-110).
[drm:amdgpu_device_init [amdgpu]] *ERROR* ib ring test failed (-110).
[drm] Initialized amdgpu 3.9.0 20150101 for 0000:01:00.0 on minor 0
it87: Found IT8728F chip at 0x228, revision 1
it87: Beeping is supported
systemd-journald[109]: Received SIGTERM from PID 1 (systemd).
systemd: 21 output lines suppressed due to ratelimiting
ip_tables: (C) 2000-2006 Netfilter Core Team
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sr 2:0:0:0: Attached scsi generic sg2 type 5
sd 6:0:0:0: Attached scsi generic sg3 type 0
EXT4-fs (sda2): re-mounted. Opts: data=ordered,discard
acpi_cpufreq: overriding BIOS provided _PSD data
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
i8042: PNP: No PS/2 controller found.
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc90003165000, 94:de:80:2f:90:05, XID 0c900880 IRQ 36
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
i8042: PNP: No PS/2 controller found.
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x42
sp5100_tco: I/O address 0x0cd6 already in use
input: PC Speaker as /devices/platform/pcspkr/input/input5
snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
media: Linux media interface: v0.10
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
snd_hda_codec_via hdaudioC0D0: autoconfig for VT2020: line_outs=4 (0x24/0x25/0x26/0x27/0x0) type:line
snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x28/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_via hdaudioC0D0: dig-out=0x2d/0x2e
snd_hda_codec_via hdaudioC0D0: inputs:
snd_hda_codec_via hdaudioC0D0: Front Mic=0x29
snd_hda_codec_via hdaudioC0D0: Rear Mic=0x2b
snd_hda_codec_via hdaudioC0D0: Line=0x2a
mousedev: PS/2 mouse device common for all mice
Linux video capture interface: v2.00
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input7
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
usbcore: registered new interface driver btusb
random: crng init done
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input20
r8169 0000:03:00.0 enp3s0: renamed from eth0
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
EDAC MC: Ver: 3.0.0
MCE: In-kernel MCE decoding enabled.
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
SGI XFS with ACLs, security attributes, realtime, no debug enabled
XFS (dm-2): Mounting V5 Filesystem
Adding 31248380k swap on /dev/mapper/excelsior-swap. Priority:-1 extents:1 across:31248380k FS
XFS (dm-2): Starting recovery (logdev: internal)
usb 7-2.2: set resolution quirk: cval->res = 384
usbcore: registered new interface driver snd-usb-audio
uvcvideo: Found UVC 1.00 device (046d:0825)
uvcvideo 7-2.2:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 7-2.2:1.0: Entity type for entity Extension 6 was not initialized!
uvcvideo 7-2.2:1.0: Entity type for entity Extension 7 was not initialized!
uvcvideo 7-2.2:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 7-2.2:1.0: Entity type for entity Extension 3 was not initialized!
uvcvideo 7-2.2:1.0: Entity type for entity Camera 1 was not initialized!
input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:16.2/usb7/7-2/7-2.2/7-2.2:1.0/input/input21
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
XFS (dm-2): Ending recovery (logdev: internal)
systemd-journald[302]: Received request to flush runtime journal from PID 1
systemd-journald[302]: File /var/log/journal/7c55d91e83b74b95b2e0e0a3f94f3c76/system.journal corrupted or uncleanly shut down, renaming and replacing.
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: data=ordered,discard
XFS (dm-0): Mounting V5 Filesystem
XFS (dm-0): Starting recovery (logdev: internal)
XFS (dm-0): Ending recovery (logdev: internal)
microcode: CPU0: new patch_level=0x0600084f
microcode: CPU2: new patch_level=0x0600084f
microcode: CPU4: new patch_level=0x0600084f
microcode: CPU6: new patch_level=0x0600084f
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
r8169 0000:03:00.0 enp3s0: link down
r8169 0000:03:00.0 enp3s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
loop: module loaded
Bridge firewalling registered
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
Initializing XFRM netlink socket
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
r8169 0000:03:00.0 enp3s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
br0: port 1(enp3s0) entered blocking state
br0: port 1(enp3s0) entered disabled state
device enp3s0 entered promiscuous mode
br0: port 1(enp3s0) entered blocking state
br0: port 1(enp3s0) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
Key type dns_resolver registered
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
systemd-journald[302]: File /var/log/journal/7c55d91e83b74b95b2e0e0a3f94f3c76/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
usb 7-2.2: reset high-speed USB device number 4 using ehci-pci
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
fuse init (API version 7.26)
r8169 0000:03:00.0 enp3s0: link down
br0: port 1(enp3s0) entered disabled state
r8169 0000:03:00.0 enp3s0: link up
br0: port 1(enp3s0) entered blocking state
br0: port 1(enp3s0) entered forwarding state
r8169 0000:03:00.0 enp3s0: link down
br0: port 1(enp3s0) entered disabled state
r8169 0000:03:00.0 enp3s0: link up
br0: port 1(enp3s0) entered blocking state
br0: port 1(enp3s0) entered forwarding state
r8169 0000:03:00.0 enp3s0: link down
br0: port 1(enp3s0) entered disabled state
r8169 0000:03:00.0 enp3s0: link up
br0: port 1(enp3s0) entered blocking state
br0: port 1(enp3s0) entered forwarding state
r8169 0000:03:00.0 enp3s0: link down
br0: port 1(enp3s0) entered disabled state
r8169 0000:03:00.0 enp3s0: link up
br0: port 1(enp3s0) entered blocking state
br0: port 1(enp3s0) entered forwarding state
r8169 0000:03:00.0 enp3s0: link down
br0: port 1(enp3s0) entered disabled state
r8169 0000:03:00.0 enp3s0: link up
br0: port 1(enp3s0) entered blocking state
br0: port 1(enp3s0) entered forwarding state
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
r8169 0000:03:00.0 enp3s0: link down
br0: port 1(enp3s0) entered disabled state
r8169 0000:03:00.0 enp3s0: link up
br0: port 1(enp3s0) entered blocking state
br0: port 1(enp3s0) entered forwarding state
r8169 0000:03:00.0 enp3s0: link down
br0: port 1(enp3s0) entered disabled state
r8169 0000:03:00.0 enp3s0: link up
br0: port 1(enp3s0) entered blocking state
br0: port 1(enp3s0) entered forwarding state
r8169 0000:03:00.0 enp3s0: link down
br0: port 1(enp3s0) entered disabled state
r8169 0000:03:00.0 enp3s0: link up
br0: port 1(enp3s0) entered blocking state
br0: port 1(enp3s0) entered forwarding state
r8169 0000:03:00.0 enp3s0: link down
br0: port 1(enp3s0) entered disabled state
r8169 0000:03:00.0 enp3s0: link up
br0: port 1(enp3s0) entered blocking state
br0: port 1(enp3s0) entered forwarding state
r8169 0000:03:00.0 enp3s0: link down
br0: port 1(enp3s0) entered disabled state
r8169 0000:03:00.0 enp3s0: link up
br0: port 1(enp3s0) entered blocking state
br0: port 1(enp3s0) entered forwarding state
r8169 0000:03:00.0 enp3s0: link down
br0: port 1(enp3s0) entered disabled state
r8169 0000:03:00.0 enp3s0: link up
br0: port 1(enp3s0) entered blocking state
br0: port 1(enp3s0) entered forwarding state
r8169 0000:03:00.0 enp3s0: link down
br0: port 1(enp3s0) entered disabled state
r8169 0000:03:00.0 enp3s0: link up
br0: port 1(enp3s0) entered blocking state
br0: port 1(enp3s0) entered forwarding state
r8169 0000:03:00.0 enp3s0: link down
br0: port 1(enp3s0) entered disabled state
r8169 0000:03:00.0 enp3s0: link up
br0: port 1(enp3s0) entered blocking state
br0: port 1(enp3s0) entered forwarding state
r8169 0000:03:00.0 enp3s0: link down
br0: port 1(enp3s0) entered disabled state
r8169 0000:03:00.0 enp3s0: link up
br0: port 1(enp3s0) entered blocking state
br0: port 1(enp3s0) entered forwarding state
r8169 0000:03:00.0 enp3s0: link down
br0: port 1(enp3s0) entered disabled state
r8169 0000:03:00.0 enp3s0: link up
br0: port 1(enp3s0) entered blocking state
br0: port 1(enp3s0) entered forwarding state
r8169 0000:03:00.0 enp3s0: link down
br0: port 1(enp3s0) entered disabled state
r8169 0000:03:00.0 enp3s0: link up
br0: port 1(enp3s0) entered blocking state
br0: port 1(enp3s0) entered forwarding state